Page 45 - CHROMA ELITE PAINT

USES:

Excellent adhesion on most any interior or exterior surface including
weathered wood, shakes, plywood, clapboard, primed metal, galvanized,

primed synthetic or aluminum siding, tin, copper, asbestos, acoustic tile,

asphalt, urethane, polyester, Styrofoam, adobe, brick, stucco, concrete,
clay, masonry, slate, slab and various other substrates. For interior or

exterior use on residential, commercial and industrial applications.
THE BLOCK can be tinted to a lighter shade of the top coat color to

decrease the number of coats required for colored finishes (Inquire for

more information).
SURFACE PREPARATION:

All surfaces must be sound, dry, clean and free of oil, grease, dirt, mildew,
form release agents, curing compounds, loose and flaking paint and other

foreign substances. All exterior surfaces must be prepared by thoroughly

pressure washing with a water and chlorine mixture using at least 1500 P.S.I.
to remove any previous coatings, dirt, grease and other foreign materials,

especially mold, mildew and algae. NEW SURFACES: Prepare new surfaces
as follows: Concrete, Masonry and Plaster - Cure at least fifteen days before

painting, poured in place concrete must cure for at least seven days and the
pH must be 9.0 or lower. Roughen slick poured or precast concrete and

remove sealers by chemical cleaning or abrasive method such as sanding.

Rinse thoroughly with water and allow to dry. Drywall - Remove sanding
dust. Wood Interior - Sand smooth and dust clean. Exterior - Counter sink

nails. Caulk with latex-type caulk. Slight discoloration on staining woods is

normal. If discoloration is considerable, apply a second coat for improved
protection. Steel & Metal - Prime & prepare any rust or bare metal with

RED-OX metal primer..