Page 41 - CHROMA ELITE PAINT

and coating for metal roof.

METAL-PRIME RED has excellent adhesion to most any metal
surface plus provides excellent waterproofing and chemical resistance.

It has all the advantages of solvent based products without the use of

hazardous solvents. Easy application and cleans up while still wet
with soap and water. METAL PRIME RED does not have to be top

coated but can be top coated with most any latex paint or coating

USES:

METAL-PRIME RED can be used for interior or exterior surfaces,

including metal roofs. It has excellent adhesion to aluminum, steel,
galvanized, ferrous and other metals in normal chemical environments. It

is excellent for both new construction and renovations on industrial,

commercial and residential applications.

SURFACE PREPARATION:

For proper adhesion and maximum performance it is essential that the surface
is prepared properly. The surface must be absolutely clean, dry, and free of all

scaling rust, mill scale, dirt, grease, wax, oil, chalk, incompatible paint or

detergent/chemical films. Rusted metals should be cleaned down to remove
all scaling and flaking rust by scraping, wire brushing, sanding or

sandblasting. Be sure the surface is thoroughly de-greased and moisture free

before priming. Use a degreaser on galvanized or coated metals that have oils
or surface treatments.